PDA

View Full Version : how do you bleed the mower


captain henry45
10-06-2009, 08:59 PM
I have a 52"lesco walk behind and i need to find out how to bleed the hydaulic system after you change the fluid or if you even need to

topsites
10-06-2009, 09:10 PM
You shouldn't have to, but take it easy at first and see how it all works.

Restrorob
10-06-2009, 09:16 PM
You shouldn't have to, but take it easy at first and see how it all works.

??????


Always fill the new filter(s) with oil before installing, Once the system is re-filled raise and block the drive wheels off the ground. Start the engine and run about 3/4 throttle, Move the controls full forward then full reverse slowly 8 to 10 times then re-check fluid level.

Set it back on the ground and go mow......