PDA

View Full Version : cv23 loses rpms


Morningside
10-06-2009, 10:32 PM
after i rebuilt the carb (kit) engine drops rpms when cutting ( tall or short grass) replaced fuse / pulse. new fuel filter, plugs, even replaced gas caps. any suggestion?

Restrorob
10-06-2009, 10:41 PM
replaced fuse / pulse.


I don't quite follow what you mean above, Did you get the throttle cable adjusted correctly after re-installation of the carb ?

Did the governor spring drop off when you removed the carb ?

Morningside
10-07-2009, 01:39 AM
Sorry about that "fuse/pulse" should have been "FUEL/PULSE Pump". Govenor spring is in place. It just "feels" like the choke is partially engaged. It will run fine at high idle with blades engaged but when i start to cut, even SHORT grass, it will "Bogg down" it seems like only 3/4 throttle when cutting.