PDA

View Full Version : take pully off spindle


btsland
10-11-2009, 09:37 AM
I have a 36" wright standard and the spindle is broken. I am haveing a problem removeing the blade belt pully off of the spindle. are there any tricks to remove???????

whosedog
10-11-2009, 10:14 AM
On my 52" there is a spring loaded belt tensioner,I spin the nut back to release the tension.Try using a ratcheting tiedown to a fixed point on the mower deck to relieve belt tension;take the nut off top of pulley;then nuts off spindle housing.

btsland
10-11-2009, 08:14 PM
had to take out 2 top bolts and put into other screw holes to back pully off. tk