View Full Version : Hard pull start
10-22-2009, 11:50 AM
Have a Kohler Pro 13 and went to use it last week and it was real hard to pull start like it was lock up.and at one time it suck back in about rip my arm off.got it to start and ran fine.I dont use the mower that much.can anyone give me any ideas what this can be.Thanks
10-22-2009, 02:24 PM
Lose blade, shered flywheel key, hydrolock, non working compression release, could be a lot of things
10-22-2009, 02:28 PM
Make sure your starting it properly. Pull slowly till compression. Then re pull to start after you have locked up the pull start.
10-22-2009, 05:47 PM
Pull the plug to see if gas is leaking into the cyclinder.....if it does then it is very hard to pull. It usually takes a long time for a lot to get in there if the carb is leaking a little...like over nite.
10-24-2009, 11:16 AM
They always were a joy to start. As posted above, all are very true. Just to add to your selection, it could also be a problem with the ign module.
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.