PDA

View Full Version : Poulan 2150 Saw


Butch1957
11-06-2009, 08:16 PM
how do the fuel lines / pump lines hook up on the carby and from the tank to the primer bulb?

THis has the side primer bulb with two outlets and the tank has two lines coming out of it; one with the fuel filter and the other without the fuel filter.

Any ideas ?


Thanks.

Breezmister
11-06-2009, 09:36 PM
how do the fuel lines / pump lines hook up on the carby and from the tank to the primer bulb?
Any ideas ?


The line with the filter goes to the intake side of the carb, while the other is the return line. If you hook them up backwards, when you press the bulb, you will get alot of resistance. If you hook them of correctly, then fuel will fill the bulb and pass back into the tank. On some carbs, the barbed side is the intake while the smooth side is the return side.

Butch1957
11-06-2009, 10:14 PM
Is the intake side of the Carby ( Walbro ) the opposite side of the metering diaphram on the carb ? Which is the barbed side like previously stated.

Thanks.

Breezmister
11-06-2009, 10:28 PM
Do you know which Walbro carb you have ? If you have a carb with one barbed side, then that would be the intake side. If you have 2 barbed connections, the larger of the two is the intake line