PDA

View Full Version : Need a couple parts


User Name Taken
11-08-2009, 10:44 PM
Hi guys, new to the site. Looking for some blades and a hydo filter for my Hustler 23/52" Mini Z. I see there are a few different blades out there. I have heard the Gator blades take more HP to run :weightlifter:
I have been having some clogging problems due mostly to clover and am wondering if I need a "high lift" blade or what.

mowpart rep
11-09-2009, 02:14 PM
Do you have the model number for your mower or the part number for the blades and filters?

mowpart rep
11-09-2009, 02:25 PM
The gators and high lift do require a little more power. I wouldn't worry too much 23hp on a 52" is pretty powerful. High lift or gator blades will help solve your discharge issue. You could also try spraying fluid film on the bottom side of your deck.

http://www.mowpart.com/Fluid-Film/c1200/index.html

User Name Taken
11-09-2009, 10:27 PM
Thank you Russel. Model # is 927244 s/n 07053103. filter # is 768341 thanks

mowpart rep
11-12-2009, 11:38 AM
Either of these blades will work for your mower.

http://www.mowpart.com/advanced_search_result.php?keywords=795526&osCsid=13r95nlp31mknhm0fu2luu4gl1&search.x=15&search.y=6

Here is a link to your filter.

http://www.mowpart.com/advanced_search_result.php?keywords=120-471&osCsid=7ndncosonsovk2utpp1leej757

Thanks.
Russell

User Name Taken
11-13-2009, 06:04 PM
I went to order and is says no longer available on the filter ??

User Name Taken
05-23-2010, 09:36 PM
OK guys, Back again....... What are these new Excel G6 blades on the site? Is 17 55/64 close to 17 7/8 ? They look like a gator blade. I just need replacements for the fusion blades. My gator blades are holding up well but don't discharge the clover well at all. I sprayed the underside of the deck with non stick spray after this go round. We'll see next time if it helps.

mowpart rep
05-24-2010, 10:00 AM
This is the newest and best blade we offer. They are the replacement for fusion. Please call our toll free number 877-306-3708 If you have your old fusion part number they can tell you the G6 replacement blade.

User Name Taken
05-24-2010, 11:22 PM
Thank you again Russell.

User Name Taken
06-12-2010, 03:59 PM
795526 - for reference.

User Name Taken
06-16-2010, 10:41 PM
Will I get an e-mail when my order ships ? I recieved a confirmation one.