ALLIANCELighting
11-18-2009, 12:51 PM
ALLIANCE (http://www.allianceoutdoorlighting.com/)has added several new features to our series of transformers that make it easier to install and a better value to the installer.
http://www.allianceoutdoorlighting.com/gallery/T_Fgallery1-3.jpg
Relay - ALLIANCE added a relay to the 600/900/1200 (http://www.allianceoutdoorlighting.com/transformers.html) watt transformers that will bring the amperage delivered to the timer (http://www.allianceoutdoorlighting.com/dgtimer.html) and photocells (http://www.allianceoutdoorlighting.com/photocell.html) down to a lower level thus improving the longevity of life to those accessories and eliminating failures.
Amp Loop - ALLIANCE has added an Amperage Loop to the 600/900/1200 (http://www.allianceoutdoorlighting.com/transformers.html) watt transformers which will provide contractors with one easy point of reference to check the primary amperage on the transformer. This loop is specifically installed for that amperage reading, and will be marked with a simple “Amp Here” card from the factory.
Tilted Lug Bar - All ALLIANCE transformers will have a tilted lug bar in which the secondary lugs (All Commons & Voltage taps from 12 to 20) will be easier to access and install. The adjusted lug bar eliminates the blind spots that occur when trying to install low voltage wires to the terminal lug. This feature is standard on all new transformers.
Removable Bottom Panel Mount- All ALLIANCE Transformers will now come with a removable bottom panel mount. Each panel mount is attached with four removable screws, allowing for more room for wiring, and the ability to attach conduits through the five knockouts.
http://www.allianceoutdoorlighting.com/gallery/T_Fgallery1-3.jpg
Relay - ALLIANCE added a relay to the 600/900/1200 (http://www.allianceoutdoorlighting.com/transformers.html) watt transformers that will bring the amperage delivered to the timer (http://www.allianceoutdoorlighting.com/dgtimer.html) and photocells (http://www.allianceoutdoorlighting.com/photocell.html) down to a lower level thus improving the longevity of life to those accessories and eliminating failures.
Amp Loop - ALLIANCE has added an Amperage Loop to the 600/900/1200 (http://www.allianceoutdoorlighting.com/transformers.html) watt transformers which will provide contractors with one easy point of reference to check the primary amperage on the transformer. This loop is specifically installed for that amperage reading, and will be marked with a simple “Amp Here” card from the factory.
Tilted Lug Bar - All ALLIANCE transformers will have a tilted lug bar in which the secondary lugs (All Commons & Voltage taps from 12 to 20) will be easier to access and install. The adjusted lug bar eliminates the blind spots that occur when trying to install low voltage wires to the terminal lug. This feature is standard on all new transformers.
Removable Bottom Panel Mount- All ALLIANCE Transformers will now come with a removable bottom panel mount. Each panel mount is attached with four removable screws, allowing for more room for wiring, and the ability to attach conduits through the five knockouts.