PDA

View Full Version : F250 and downeaster dump insert


SIWEL
11-23-2009, 08:21 AM
I have a 1995 Ford F-250 XLT 4x4 for sale.

167,000 miles

The good.
- clean interior
- whelen hide-away strobes
- brake controller
- new front axle u-joints
- new ball joint
- power windows/locks
- Tymar intake
- 2 decent tires

The bad.
- needs 2 tires (the toe is not set right and wore out the outside fronts)
- driver side fender rusty (have spare, not painted, not installed, included)
- bed is hit on pass side (have another bed, not perfect but good, painted to match)
- tranny on its way out, still driveable


It currently is set up for a fisher 3 wire minute mount included for extra.

With out fisher set up... $3,700.00
With Fisher set up... $4,500.00

Available for pick up TODAY!!!



Also have a DownEaster dump insert for sale. 2008 model, with leaf box and side boards.

alone... $2,500.00
With truck... $2,000.00

DOES NOT COME WITH TOOL BOX!!!

laird006
11-23-2009, 01:58 PM
interested, more pics? pics of damaged/rusted areas. pics of frame.

SIWEL
11-23-2009, 02:16 PM
my camera wont be home until tongiht, once i get it i will post ASAP

call me with any questions 860-398-3413

laird006
11-23-2009, 02:19 PM
is trans slipping? fluid burnt? lost a gear? i'm 350 miles away so towing isnt a real good option.

SIWEL
11-23-2009, 04:34 PM
it slips in first, usaully good after that. fluid is burnt tho. I would drive it that far tomorrow if i had a reason to. overall a good truck i just no need for it here.

SIWEL
11-23-2009, 04:35 PM
update...

there is a chipped tooth on the flex plate, sometimes the starter misses, but never has left me stranded (if it doesnt get it the first time it will the 2nd or 3rd) . I do have a flex plate but it is not installed. I was going to do it when i did the tranny.

laird006
11-23-2009, 06:30 PM
get me some pics from all over and any damage. PM me your bottom dollar if you don't mind.

supercuts
11-23-2009, 08:34 PM
what kind of plow? is it a powerstroke?

SIWEL
11-23-2009, 08:38 PM
it has mounts for a fisher 3 plug, but i will keep them if you do not want them. I have never plowed with the truck, put the frame plates on and the wiring with intentions of using it, but my buisness plan has changed a little. It does have the powerstroke.

supercuts
11-23-2009, 09:13 PM
could you take a pic of the plow, new bed, and damaged bed side? thanks

SIWEL
11-23-2009, 09:22 PM
No plow is included
Posted via Mobile Device

supercuts
11-23-2009, 09:45 PM
so the fisher "setup" is just the frame mount and wiring? for $800 extra?

SIWEL
11-23-2009, 09:53 PM
so the fisher "setup" is just the frame mount and wiring? for $800 extra?

Yes. Have uyou tried to buy that stuff lately? I will show the receipt for the wiring for 800 and the frame plates for 200, never mind the sandblasting bolt bag and installation
Posted via Mobile Device

SIWEL
11-24-2009, 08:10 AM
Here are some pictures of the under carriage and the damage.

More to follow

SIWEL
11-24-2009, 08:12 AM
here are some more

SIWEL
11-24-2009, 08:15 AM
- Passenger side frame
- Drivers front fender (have new to replace)
- Passenger rear bedside
- Drivers Undercarriage
- Drivers undercarriage
- Drivers bedside
- New bed
- New bed rear scratch
- New bed pass side/scratch

SIWEL
11-24-2009, 02:12 PM
To the top
Posted via Mobile Device

THEGOLDPRO
11-24-2009, 02:27 PM
is it a turbo???

SIWEL
11-24-2009, 02:30 PM
Yea its a powerstroke they all are
Posted via Mobile Device

SIWEL
04-17-2010, 05:19 PM
Well over the past few months we had to do some work on the truck in order to keep using it.

Work includes:

-Transmission
- Ball joints (4)
- 4 tie rods
- Front axle pivot bushing
- Front axle pivot bracket
- Rear u-joint
- Starter
- Radio
- transfer case fluid, tranny fluid
- Downpipe and custom exhaust (has a cat installed)


The truck body is in the same condition, but I no longer have the spare bed. Truck runs awesome and is very reliable. I still drive it every day and like the truck a lot. Has 3.73 gears i believe.

R & R Yard Designs
04-17-2010, 07:14 PM
I would like to talk to you about this truck. Can you pm me and we can talk more. Me or one of the guys that work for me would buy it
Posted via Mobile Device

SIWEL
04-17-2010, 07:20 PM
Updated price $4,000.00 since the work has been completed. I have a older husky tool box that could go with it (kinda shot but gets the job done.) also NO PLOW stuff.

SIWEL
04-18-2010, 11:06 AM
Will take trades of a 18'+ open trailer

SIWEL
04-19-2010, 12:16 AM
or mason dumps plus cash

SIWEL
04-19-2010, 01:18 PM
to the top

SIWEL
04-24-2010, 12:19 AM
Sold!!!!!!!