PDA

View Full Version : Kubota B20 tractor


Turf Dawg
12-11-2009, 03:12 PM
I think this is a 1992 year model but am not 100% sure. The serial # is 52038. This is the construction model that has the huge sub frame that is also a hydro oil resivoir and the extra filter. This is a tractor that was built for a backhoe so the seat will spin. I do not have a backhoe on there now because the person I bought it from kept it to go on his new one. The tractor has 563 hrs as for as I know because I bought it used. The tach does not give a true reading but the hour meter works as it should. A couple of months ago I had a new front trans seal put in, the dealer said that the clutch and trans looked fine, the hydro fluid was also changed at this time. The right rear hazard light does not work [wire broke off onside] and the left headlight has the lens missing but works. The 4wd, diff lock, pto, ect... work great. I am going to let a box blade and a John Deere 261 grooming mower go with it. The tires are in great shape and are original except for the left front.

I am asking 9800. Feel free to ask ?'s or come look and make an offer.

Turf Dawg
12-13-2009, 12:08 AM
might let a tiller go also

Turf Dawg
12-15-2009, 01:47 PM
bump.................

Turf Dawg
12-26-2009, 02:11 PM
bump.............

Turf Dawg
12-30-2009, 09:37 PM
Great running compact tractor

Turf Dawg
01-11-2010, 07:45 PM
Anyone interested? It is ready to make someone some money.
Remember you get a Tractor, Befco tiller, JD grooming mower and a box blade.
It has the frame for a backhoe or trencher.

Turf Dawg
01-13-2010, 10:23 AM
bump...........

PhillipsBrosLawnCare
01-13-2010, 11:56 AM
Whats the horsepower on the machine?

supercuts
01-13-2010, 05:57 PM
why post without a price?

supercuts
01-13-2010, 05:57 PM
dont worry, i justed kicked myself for you.........

Skimastr105
01-13-2010, 06:12 PM
Is the bucket bent? Are the loader arms straight and true?

Turf Dawg
01-13-2010, 08:53 PM
It is a 20HP and I believe the books says it is 14 PTO HP.
Yes the top of the bucket has a small bend that was there when I purchased it. I do not think you could bend the bottom of the bucket though because the cutting edge is around a .5" plate. Yes the arms are straight but the tilt cylinders bushings have some slack [not worn plum out but not new either]. I have more pics if someone wants to pm me their email.