PDA

View Full Version : Help With Sulky Attachment


jennylee
01-17-2010, 11:37 AM
Hi I'm buying a GR1332 pro walk with a rear discharge, I would like to get a sulky attachment also but wonder if I would need to change it to a side discharge? Also was there much fabrication involved in fitting the Wright sulky?

Any info much appreciated.

Happy mowing!
JE

MikeKle
01-17-2010, 01:25 PM
You can use a sulky with a rear discharge, and all that is needed for the wright sulky is to drill the holes in the mowers frame for the mounting coupler, or I guess you could weld it on, but best to drill holes in case you want to remove it later. good luck.

jennylee
01-17-2010, 03:02 PM
thanks for reply Mike!
I post my progress

silverado212
01-17-2010, 03:30 PM
Your hitch should be 11 1/4" from the ground to the center of the grease fitting.

STIHL GUY
01-17-2010, 04:43 PM
i would bolt it so you can take it off later down the road if you wish to