Hunter SVC 400 Question

[MEXANDME]

I have a question about the SVC 400. Would someone mind providing me with Hunter's Tech Services phone number. (My question is whether or not stations can be set to "manually water" consecutively?)

Thanks / Regards,

Mex

[sprinklerchris]

I have a question about the SVC 400. Would someone mind providing me with Hunter's Tech Services phone number. (My question is whether or not stations can be set to "manually water" consecutively?)

Thanks / Regards,

Mex

I show Hunter Industries technical support at 800-733-2823

[MEXANDME]

Thanks a bunch......that is the correct number.

Regards,

Mex

[Mike Leary]

Mex the pest; get with it. We never had a website to ask questions when we started out; you are striking me as a loser.

[HokieAg07]

Yes I am pretty sure you can set the hockey puck to run all 4 zones in a cycle manually; Im pretty sure Ive done that at winterization time. All I have in my truck right now is a single station so I cant really help that way.

Look up the manual on Hunter's website...

Mex the pest; get with it. We never had a website to ask questions when we started out; you are striking me as a loser.

Easy Leary, not everybody is as sweet as me and you. Besides, those SVC's can be a bit tricky for a newb.

[MEXANDME]

Hokie: Thanks for your reply. I did talk to Hunter Tech Support and you CANNOT program them to run consecutively.

Mike Leary: Thanks for your reply as well.

Regards,

Mex

[mitchgo]

We never had a website to ask questions when we started outHmm

No wonder I see sooooo many bizarre irrigation things 25 -30 years ago! You guys just didn't know!:laugh::laugh:

[mitchgo]

Though, I must admit.

There is a difference between asking a question because you don't know it and being resourceful and finding things out on your own.

Google could have told you hunter's number in just a minute of looking

[FIMCO-MEISTER]

Mex the pest; get with it. We never had a website to ask questions when we started out; you are striking me as a loser.

He never fails to thank us Mike.

[txgrassguy]

I found out some time ago that the latching solenoid controller from Hunter wouldn't allow a consecutive manual run setting. Individual zones yes but not like a program cycle without completely re-programming the controller.
I see where Hunter has come out with a stand alone battery powered controller for latching solenoid applications which does allow manual sequencing.