PDA

View Full Version : Rezloh Edge?


wanabe
01-21-2010, 11:12 PM
Anyone run a Rezloh edge? Will it replace a tooth bucket? Currently only have a heavy duty 80 inch smooth edge bucket for the T300 and am worried I will have digging problems. Thanks

stuvecorp
01-21-2010, 11:23 PM
I got one this year and am not real impressed to be honest, but it looks wicked cool. And everyone asks about on job sites.

wanabe
01-21-2010, 11:26 PM
Would a tooth bucket be better? Thanks

stuvecorp
01-21-2010, 11:31 PM
I've never had a tooth bucket(or tried one) so not sure. Most of our soil is sandy stuff.

treemover
01-21-2010, 11:52 PM
What are you main uses for your loader? i would say hogging dirt all day stay with teeth. I really like the rezloh for fine grading and shaving hard pan. It is also nice for cleaning up pavement if you dont have a smooth bucket on site. so i guess personal choice

wanabe
01-22-2010, 09:23 AM
Concrete prep is my main use for the T300. Im just thinking I will have a hard time digging out existing road pack driveways, ect.

Blue Goose
01-22-2010, 10:09 AM
Wanabe,
I work for a heavy highway contractor in St. Louis, geographically not that far from your area. We presently have seven Bobcats (3 T250's, 2 T300,s, and 2 S300's). We've found anything short of a toothed bucket when having to dig anything compacted is a poor substitution.

ksss
01-22-2010, 02:23 PM
I reallly like the Rezloh edge. I have had one since they came out and I cant be without one. You can dig with it, backdrag clean, lightly scarify. The only issue is you have to be careful on asphalt. When I first got my edge I stuck it right into a road on a warm day.

Tigerotor77W
01-22-2010, 03:53 PM
When I first got my edge I stuck it right into a road.

Awww, the Case servo controls not sensitive enough for you? :laugh:

xtreem3d
01-22-2010, 04:39 PM
Wanabe,
I work for a heavy highway contractor in St. Louis, geographically not that far from your area. We presently have seven Bobcats (3 T250's, 2 T300,s, and 2 S300's). We've found anything short of a toothed bucket when having to dig anything compacted is a poor substitution.

who do you work for here?
steve

ksss
01-22-2010, 04:54 PM
Awww, the Case servo controls not sensitive enough for you? :laugh:


Aww no it was too much weight and too much power combined with my underappreciation for the ability of the blade to cut. Lesson learned.:laugh:

Tigerotor77W
01-22-2010, 05:27 PM
Aww no it was too much weight and too much power combined with my underappreciation for the ability of the blade to cut. Lesson learned.:laugh:

Damn. You got me there. ;)