PDA

View Full Version : 07 PG magnum,700 hrs for $3,000 in MA


James Cormier
01-30-2010, 10:49 AM
I bought this in the Fall of 2007 so its got a little over 2yrs of use. Runs fine, Ive had no problems with it. I have the plastic fenders ( I take them off during lime season, I find its easier to clean without them) I have extra pull starter, and a bunch of extra cables and other stuff.

I also replaced the t coming off the pump so it only supplies one spray tip. Less plumbing means far better spraying. All hoses were left on so if you want to go back and use all 4 tips you would just need to replace that one nipple. The 3rd hole cable has been removed so its at a fixed location. I will order a new one and included that with the sale, however I feel its best to keep that fixed.

Asking 3k, not sure if that's reasonable for this machine, I welcome comments

http://www.pbase.com/oldstonejim/image/121514392.jpg
http://www.pbase.com/oldstonejim/image/121514390.jpg
http://www.pbase.com/oldstonejim/image/121514389.jpg
http://www.pbase.com/oldstonejim/image/121514393.jpg

James Cormier
02-07-2010, 06:49 AM
Price drop to $2500.00

Need room in the shop for a new motorcycle....so come on guys someone come get this nice running machine :)

mattfromNY
02-07-2010, 12:23 PM
I'll give you a bump back up to the top, someones gotta be looking for one.

djagusch
02-07-2010, 12:40 PM
I'm surprised this hasn't sold yet. At 3K it was a good deal at 2.5K it's a steal. I would buy it but shipping or the drive from MN makes it not feasible.

James Cormier
02-07-2010, 02:46 PM
Thanks for the free bumps!

And to add more incentive I am donating the money from the sale of this machine to a friend in need. One of my riding buddies lives in up state Maine and is going thru some rough times, un employed, disabled and currently fighting with the lumber mill that let him go. He is in danger of losing his house.

I am giving the $2500. to him and his family to try and help keep that from happening. However is someone wants to pay the $3k than that would help him even more :)

JJS
02-07-2010, 03:11 PM
i was going to post 5 minutes ago, but I've been kicking myself because i bought a new one last year. any corrosion on it? at that price i migh thave to take it off your hands, where in MA are you?

James Cormier
02-07-2010, 03:21 PM
i was going to post 5 minutes ago, but I've been kicking myself because i bought a new one last year. any corrosion on it? at that price i migh thave to take it off your hands, where in MA are you?

Its not really too bad, Ive seen much worse and also much better. During the season Im pretty good at blowing it off every couple of lawns (backpack blower) and try to give it a good rinse at least once a week. I also blow it off when Im done washing it.

Im in west Boylston MA, just above Worcester, just let me know if you would like to come up, or I can meet you half way.

I just bought a new zspray and I planned on keeping this for a back up machine, but I would rather help out someone in need vs let this thing sit in my barn.

James Cormier
02-17-2010, 11:31 AM
I bought this in the Fall of 2007 so its got a little over 2yrs of use. Runs fine, Ive had no problems with it. I have the plastic fenders ( I take them off during lime season, I find its easier to clean without them) I have extra pull starter, and a bunch of extra cables and other stuff.

I also replaced the t coming off the pump so it only supplies one spray tip. Less plumbing means far better spraying. All hoses were left on so if you want to go back and use all 4 tips you would just need to replace that one nipple. The 3rd hole cable has been removed so its at a fixed location. I will order a new one and included that with the sale, however I feel its best to keep that fixed.

Asking $2500, not sure if that's reasonable for this machine, I welcome comments

http://www.pbase.com/oldstonejim/image/121514392.jpg
http://www.pbase.com/oldstonejim/image/121514390.jpg
http://www.pbase.com/oldstonejim/image/121514389.jpg
http://www.pbase.com/oldstonejim/image/121514393.jpg

Weekly bump and just a gentle reminder of the price drop

Lawnut101
02-17-2010, 11:50 AM
Hmmm... I am looking for one, but you are pretty far away.

hortboy
02-19-2010, 08:58 AM
Contact Me on your permagreen. If we can make an arrangement to help out w/ delivery, maybe meet 1/2 way, we can probably create a deal.

Email me your phone number. johnsacco@hotmail.com

Thanks John

James Cormier
02-20-2010, 08:10 AM
Contact Me on your permagreen. If we can make an arrangement to help out w/ delivery, maybe meet 1/2 way, we can probably create a deal.

Email me your phone number. johnsacco@hotmail.com

Thanks John

Email has been sent

James Cormier
03-09-2010, 08:08 AM
machine has been sold

junior091273
05-06-2010, 07:05 AM
if this hasnt sold please contact me at pjtmaintain@gmail.com

LR3
05-06-2010, 09:41 PM
lol
Posted via Mobile Device