PDA

View Full Version : Replicating radii


Danscapes
03-02-2010, 11:51 AM
What technique are you guys using to get a perfect match on a radius.
Something like this:

Danscapes
03-02-2010, 06:57 PM
No one has a method of creating two perfect radius's on the end of a paver walkway?

The CAD drawing is just an example of what I'm talking about.

DVS Hardscaper
03-02-2010, 07:21 PM
yes. We have a method!

I use an old design program for designing our jobs. It's called 'Planscape'. Very old, 100% accurate, and very easy to use.

Ths first thing you need is fixed points to measure off of. These fixed points must be shown on your design to scale with your design.

My program will mark the center of a radius if you allow it to. Once I know the center, I can then have the program show how far the center is from the fixed objects.

yep, we have a method.

Danscapes
03-02-2010, 07:43 PM
No, I mean how to do it out in the field.

DVS Hardscaper
03-02-2010, 07:56 PM
LOL - i thought thats what you meant

I dunno bout others, but I have always wondered how on earth others do it accurately without a scaled plan with the measurements shown.

esnipe8
03-02-2010, 08:24 PM
Find a reference point the same distance off the bottom of the walkway and the middle of the walkway. Then hammer a piece of rebar. Then find what distance will give you the radii you want with a tape measure or string. Duplicate on the other side.... I think that only works if you are going for a 90 degree total turn. I think this is a way you can do it.

kootoomootoo
03-02-2010, 09:08 PM
...................................

esnipe8
03-02-2010, 11:13 PM
...................................

Thats what I was trying to explain, thanks for the help!

LB1234
03-03-2010, 11:39 AM
...................................



Kootoomootoo...how much did you pay for that "special" tool. Does the rebar, string, and marker come in a kit?

perhaps techo sells it in there overpriced tools?

CLS LLC
03-03-2010, 04:42 PM
Even if you weren't doing a 90 degree you could still use the same method, just measure say 48 inches from the driveway and 96 inches from the sidewalk. Then pound your rebar in and make your curve.

kootoomootoo
03-03-2010, 11:05 PM
Kootoomootoo...how much did you pay for that "special" tool. Does the rebar, string, and marker come in a kit?

perhaps techo sells it in there overpriced tools?

The shamwow guy (vince) had them on tv one day.
he said it was made in Germany so you know its good.

LB1234
03-04-2010, 08:55 AM
The shamwow guy (vince) had them on tv one day.
he said it was made in Germany so you know its good.

dude, you are too much...:laugh::laugh::laugh::laugh: