03-09-2010, 03:05 PM
im selling a 6x12 utility trailer i build last sumer, this trailer is built very very well, frame is all box tubing even cross supports,it has a 3500lb 4in. drop axle, the fenders are made from 1/8th in. thick steel not flimsy tin like other trailers and have steps attached to them making it very easy to get in without dropping the gate. the gate itself is removable by taking out three pins it will come right off. it has 12" tall sides and a fixed spare tire mount in the front as seen in pics, all wheels/tires were brand new when bult last year and have less than 2000 miles on them. it features all l.e.d. lights,electric trailer brakes (7 way plug), laser cut tie downs on sides and front, and the tounge support has an american flag laser cut into it. i was planning on powder coating it but ran short of money and i brush painted it with rustoleum primer and paint, its showing a little bit of rust where it was knicked and rubbed in a few spots. im also going to include the toolbox attached to the side rail.. thanks for looking, 1500 o.b.o.