PDA

View Full Version : Permagreen Ultra Very Good Shape


GravelyGuy
03-17-2010, 05:19 PM
I am selling this Permagreen Ultra to buy a Z-spray. Myself and A Plus Bob (lawnsite member) have went over this machine for a couple of weeks and replaced everything that was worn/broken. THANK YOU Bob! The machine is ready to use right away. The only broken part is the electric start. It's not worth fixing. It starts in 1-2 pulls.

We have a ton money in parts and labor on this machine getting it ready to go for this season.

New parts:

-New Transaxle----We didn't replace this part, but it was still wrapped in factory plastic where it was recently replaced. It is not original. Look at the pics.
-Brand New Carb and Springs
-New Universal Sleeves
-Main Hopper Slide Plate
-Third Hole Adjustment Cable
-Third Hole Adjustment Handle
-New Belt
-New Spinner Shaft and Hub
-New Oil, Fuel Filter, Air Filter
-New Rear Axle----We had a new stainless axle cut to factory spec and installed because the wheels had some play in them. This will never need work again.

The machine was also cleaned of all of the old grease, brakes adjusted, and we replaced any hardware/gaskets that needed it. The tank and lines were completely flushed out.

I also have a brand new spray switch and hopper paddle that we didn't end up needing that will be included

The machine does not have an hour meter so the hours are unknown, but it is ready to go and nothing is broken. Many of the PG you see for sale that are advertised "ready to go" are not.

The price is $2500 firm.

GravelyGuy
03-17-2010, 05:21 PM
more..........

GravelyGuy
03-17-2010, 05:21 PM
Some new parts

GravelyGuy
03-17-2010, 05:28 PM
I forgot, we also replaced the on/off switch with a new one.

GravelyGuy
03-18-2010, 10:19 AM
to the top

GravelyGuy
03-18-2010, 05:41 PM
Bump...........

GravelyGuy
03-18-2010, 08:10 PM
Here is the underside shot as requested.

GravelyGuy
03-19-2010, 05:44 PM
You won't find a better running PG Ultra.

indyturf
03-19-2010, 06:35 PM
Looks very clean!! someone will get a nice machine..

GravelyGuy
03-19-2010, 08:07 PM
Looks very clean!! someone will get a nice machine..

Thanks Jay!

a plus bob
03-19-2010, 10:31 PM
We went through the whole machine.You forgot the new throttle cable :) Anything that needed repaired or replaced was! This machine is ready to spread fert tomorrow.I cant believe some body hasn't jumped on this yet!

a plus bob
03-20-2010, 09:12 AM
Bump for a good machine.

GravelyGuy
03-22-2010, 03:12 PM
Sold.............

a plus bob
03-22-2010, 07:59 PM
Sold.............

If you hesitated on this machine you missed a good one :cry: