View Full Version : FS: 14x5 single axle trailer
03-19-2010, 11:04 PM
I have a 14' x 5' single axle trailer with new lights newer paint and good tires. I also welded channel in the sides to put up plywood sides when needed in about 5 minutes very easy to convert. Also has a 3 place trimmer rack. The trimmer rack and channels are home made but the trailer is not. Very good condition. Could use some new wood in a few yaers but nothing immediate. $1100 obo.
03-26-2010, 09:54 PM
03-26-2010, 09:59 PM
Wood sides are loosely in there now usually the front and front two side boards have a screw through them into the 2x4 you see pictured in the front corner pic and sits nice and tight. A little too wet currently for me to pull it out of the back yard and clean it up with out putting ruts in the yard for pics so I apologize. The front box locks and has a place for a small hedge trimmer inside and a back pack blower with the tube hanging out the hole on the drivers side of the box.
03-28-2010, 12:27 AM
Bump nice trailer
03-28-2010, 11:16 AM
vBulletin® v3.8.6, Copyright ©2000-2015, Jelsoft Enterprises Ltd.