PDA

View Full Version : how high or low do i mount striping kit exmark lazer z


milo
04-01-2010, 04:48 PM
i am putting a striping kit on my exmark lazer z 60 and wanted to know how low should it be below bottom of back of deck? any info great. thanks

muxx
04-01-2010, 04:51 PM
The way I did mine, was to set my deck at the lowest height that I mow at and then put striping kit on where it stays 3/4" to 1 " off of floor. That way it never drags.

milo
04-01-2010, 05:41 PM
The way I did mine, was to set my deck at the lowest height that I mow at and then put striping kit on where it stays 3/4" to 1 " off of floor. That way it never drags.
and do you get nice stripes set like that?

muxx
04-02-2010, 07:11 AM
Sure do, I do baseball fields and they like very nice. We have won best field for 6 years running.

milo
04-02-2010, 08:59 AM
Sure do, I do baseball fields and they like very nice. We have won best field for 6 years running.
ok i mounted it on like 3/4 inch off ground for cutting at 2.5 inches. i hope it stripes good at 3 inches too cause i cut at 3 alot too

B2Y
04-02-2010, 11:07 AM
Sure do, I do baseball fields and they like very nice. We have won best field for 6 years running.

Any pics of fields?

milo
04-03-2010, 12:05 PM
i will try mine on monday if stripes good i will add pics