PDA

View Full Version : best way to move shed


JTS Landscaping lawn
04-08-2010, 07:59 PM
i have a job were we have to move a 10x12 shed all wood over about 15' i was going to use a walkbehind bobcat cause its all that will fit back into the area. But was wondering on the best way to slide it over.

howierd3866
04-08-2010, 08:36 PM
PVC pipe and roll it

JTS Landscaping lawn
04-08-2010, 10:05 PM
thats what i was kind of thinking of doing and using the dingo or if can hook a come along some were and just roll it. thanks for your help probably am going to end up going that route.

Skimastr105
04-09-2010, 09:44 PM
lag screw 4x4 or 4x6 skids under it and drag it.

White Gardens
04-09-2010, 10:23 PM
I did it by getting a set of forks for a dingo, and lifting up the rear and dragging it backwards. In order to keep the forks under the skid, I had to use 2, 4inch wide ratchet straps going around the entire shed. Luckily I just a broke a small section on the trim when the strap pulled tight. As soon as a backed myself into a corner, I unhooked the forks, moved the machine out, then pulled the forks out by hand.

Then I just lifted on the corners or just pushed it into place.

183961

1idejim
04-09-2010, 10:23 PM
i'll show some pics of a shed we moved from one ranch to another......

1idejim
04-09-2010, 10:36 PM
this took us about 3 hrs to move the shed about 4 miles, my dad, brother-in-law, my nephew and my grandson. in spite of all that family, we got something done without damage or injuries. :laugh: