PDA

View Full Version : Husqvarna HYDRO problems


jlbf0786
04-15-2010, 01:00 PM
I'm having trouble adjusting the HYDRO pump's on my Husqvarna walkbehind.

The left wheel wont stop turning completely, no matter how far i turn the hydro-pump.. i unscrewed it so far that the hydro fluid shot out of the pump itself.. and it went everywhere! but even then, the wheel was still turning!

Can anyone give me any insight on this?

thanks

Restrorob
04-15-2010, 06:17 PM
Raise the wheels off the ground and block it up, Start the engine and make your adjustment with the control lever linkage going to the pump not with anything on the pump it's self. Adjust until the wheel stops creeping.

jlbf0786
04-19-2010, 08:34 AM
Raise the wheels off the ground and block it up, Start the engine and make your adjustment with the control lever linkage going to the pump not with anything on the pump it's self. Adjust until the wheel stops creeping.

--- man you have the answer to "literally" everything! ---
Thanks again, for your help

Restrorob
04-19-2010, 06:24 PM
http://67-72chevytrucks.com/vboard/images/smilies/thumbs.gif