View Full Version : Gravely Kaw.25/60 zero-turn
motsinger's lawn care
04-27-2010, 07:46 AM
My father has a Gravely 25/60 and for us to get it to cut decent we had to put the high lift blades on it like I have on my Lazer Z. The mower seems as though it does not have enough blade tip speed. What I'm asking, can the Kaw. 25 be turned up a bit in RPM's at full throttle?
04-27-2010, 01:03 PM
It can be set at 3700 no load RPM's, Wouldn't take it much higher than that.
04-27-2010, 08:30 PM
Not so much an engine issue, as the idler spings are not set up to run tight. Look at newer xdz deck, the springs are stronger. I would replace with those or rig to strech factory springs a little more, assuming that you already check to spindles to make sure that they are still good. I had to replace mine, (greaseless.)
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.