PDA

View Full Version : Back yards with fences?


ReidStylez
04-27-2010, 05:45 PM
What size mower fits through most fence gates? Is it 36"?

M.M.A. Mowing
04-27-2010, 05:47 PM
Depends on most gates, I have gates my 52 will fit through and then there are some that my 36 will not. Just depends. But my 36 does fit through most gates.
Posted via Mobile Device

KrayzKajun
04-27-2010, 05:48 PM
depends! i ahev yards my 46" will go through i have some tht a 32" jus barely makes it!

All_Toro_4ME
04-27-2010, 06:09 PM
It depends on the 36" as well. Those 36" Quicks are much wider then 36". With that said my 36 fits through most of the gates here.

unkownfl
04-27-2010, 06:15 PM
I can fit my 36 stander through all the gates I have, but I have seen ones that only a 21 would fit like at my fathers house.

yardatwork
04-27-2010, 06:27 PM
I took a 48" with a bagging system on the deck through gates before.

ReidStylez
04-27-2010, 07:12 PM
Ok, I'll have to take a look at fences around here and see I guess. Looks like 36" is the standard size.

Thanks!

freshprince94
04-27-2010, 08:43 PM
It really depends on the area. Where I am, 36" fits through most and a 32" fits through 98%. Some only a 21 can fit but that's rare.

Marcos
04-27-2010, 08:47 PM
Ok, I'll have to take a look at fences around here and see I guess. Looks like 36" is the standard size.

Thanks!

A 36" usually fits through with the discharge chute tied up, or taken off.
A 32" deck will almost always fit through with chute in position.

1993lx172
04-27-2010, 09:09 PM
I can get in most single gates with the chute up like it normally is. If I have the bagger on I have to take the chute off to get through.

lawnkingforever
04-27-2010, 09:28 PM
If you already have a bigger size mower, I would get a 32"WB. Now if this will be your primary mower then get a 36", it will fit in most gates but not all. The 32" will fit in pretty much every gate you encounter.