PDA

View Full Version : Cub Cadet Lesco z-two


unkownfl
04-27-2010, 10:15 PM
What is the size of the bolt for the blades. I don't feel like hauling the mower down to my shop and I don't have a tape to measure around the condo. I know its not the standard 15/16th.

flattoplawncare
04-30-2010, 12:08 AM
What is the size of the bolt for the blades. I don't feel like hauling the mower down to my shop and I don't have a tape to measure around the condo. I know its not the standard 15/16th.

It is an inch and one third

unkownfl
04-30-2010, 01:56 AM
1 1/8 ended up working for me the small end of a hitch wrench sold at most auto parts store and walmart.

flattoplawncare
04-30-2010, 11:49 AM
yep!!! same thing i used!! that will work for sure.

flattoplawncare
04-30-2010, 11:50 AM
Hey by the way, Where do you buy your blades and what is the size of the center hole on the blade??

flattoplawncare
04-30-2010, 11:52 AM
I had to use 2 of those wrenches, One up top and one on bottom. My blades have never been off that mower. I just bought it for 700 with 230 hours on it!!!!