PDA

View Full Version : bearings


brix
05-01-2010, 03:51 PM
I've got an older scag model ssz-22cv serial 21560 110. I've looked up the parts diagrams but it does not show the bearings on the idler pulley. I could just remove and try to get a number for it. Any other references or suggestions? thanks in advance.

brix

dutch1
05-01-2010, 04:20 PM
Generally, idlers are sold as idler/bearing assemblies. Most idlers are two halves riveted together and the bearings are not serviceable.

brix
05-01-2010, 05:28 PM
Thanks dutch,
but that is not the case with this one. I pressed the bearings out to service/lube them. when I looked at the schematics it didn't show the bearings. I will have to pull them again and bring them to a supplier to match them up I guess. Unless anyone has other ideas.

thanks, Brix

dutch1
05-01-2010, 07:56 PM
If that is indeed the case, there should be some numbers on the inner/outer race. If not mic the ID, OD and thickness and take the info to NAPA or the like.

topsites
05-01-2010, 10:02 PM
Idler pulleys are replaced whole.

brix
05-03-2010, 11:44 AM
Dutch,
I found the number on the sides as you said. Grainger has them for $5 each, thanks.
Brix

Merkava_4
05-03-2010, 06:14 PM
Motion Industries is a good place to get bearings; they got the good stuff.