View Full Version : Long or short shaft?
04-28-2000, 05:34 PM
I am replacing my stick with an auto in my 78' 3/4 4x4. Question is, if using a T350, will I need a short or long shaft? Will the automatic fit up with the transfer case with no problem? Thanks again guys!
04-30-2000, 12:24 AM
What did the transmission that you are installing, come out of? and I think the shafts are the same.
If you've got a 205 t/c with your stick,<br>it won't mount to your T350 without an <br>adapter(Advance adapters makes one)and <br>the splines don't match. It's easier to<br>use the case that originally came with your<br>T350, as for a driveshaft, autos use shorter<br>shafts than sticks because the overall length<br>of the trans and transfer case, is longer for<br>autos, so the rear driveshafts are a different length. The front shaft should<br>be the same length, but you need to check<br>the t/c side, some have yokes and some have<br>a flange type mount.<br>4LOW
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.