View Full Version : gauge sending unit
04-27-2000, 07:56 PM
Hi guys I have a 85 chevy and would like to replace the original oil pressure gauge.Does anybody know where the sender is located?Any help would be appreciated.
Check above the oil filter mount. I know on 89 they were there.
04-27-2000, 10:36 PM
If it has a 350. it should be under the distributor on the left side of the block, right behind the intake manifold(or to the rear of it depending on how you look at it) . you will need a short 1/2 in or 9/16 inch wrench to get to it. I made one. they can be kind of a pain. its a little tight. not much room between the engine and the fire wall.
04-29-2000, 09:19 PM
Thanks for the info guys I installed an aftermarket gauge and used the tapped hole above the oil filter.
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.