PDA

View Full Version : help with trailer space


Heller Landscaping
07-12-2002, 09:44 PM
hey guys can you get two w\b 48" and two 21" w\b in an 6x12
enclosed trailer? l am now using a van with one 48 and one 21
with my brother but want to upgrade to a f-250 and 6x12 enclosed all replys appreciated. thanks:confused:

LAWNGODFATHER
07-12-2002, 10:11 PM
Draw a 6'X12" rectangle on the ground with chalk. Now manuver the machines to see if they will fit.

My 6.5' X 10' open trailer I can fit 2-52" WB's on it and that's it, and they are side ways on the trailer. I can also fit a 60" DC and a 52" WB, like said above side ways only.

Jimbo
07-13-2002, 12:21 AM
Do the chaulk thing, so you can see for yourself. It will somewhat depend on the model (by a few inches). I have a 6x12' open trailer and I can get two Scag WB's on it (inline). When I try to put my 52" ZTR, and one WB on the trailer the WB has to go on sideways (wouldn't work in an enclosed trailer).

If you are upgrading do yourself a favor and go bigger. I would go 7x14 or even 7x16. You will want the extra room if you get a larger deck in the future. After one year my 6x12 open is not large enough, nd I am a lone ranger.

Jim

HarryD
07-13-2002, 12:59 AM
go with a 7 or 8 x 16 if your going to a enclsed trailer
a 6.5 x 16 is your going open .
i can fit my 60" 48" 36" 21" and my power rake and aerator on it with no probs on my 6.5 x 16

Lawn-Scapes
07-13-2002, 01:07 AM
yes you can

Heller Landscaping
07-13-2002, 05:16 PM
guys i would go with an open but i don't have a garage and the enclosed trailer must do the reason is going with a 6x12 is because they are about 3000 dollars around here where do you guys get yours ? can anyone send me some pictures of your enclosed setups thanks.:confused: :mad: :blob3:

Doc Pete
07-13-2002, 05:31 PM
You should be able to put the 21" machines on either side of the rear wheels of the last in machine, having the big machines straight in. I can put my two "very long and large" Hustler WB's, one 48" and one 54", in straight ahead, and put either a blower or 21" machine on one side on the rear wheel of the last machine. You should have no problem with one on either side.
I have an enclosed 6x12 trailer.
Pete

gogetter
07-13-2002, 06:56 PM
Heller, here's a thread with photos of enclosed trailers:

http://www.lawnsite.com/showthread.php?s=&threadid=18685&highlight=enclosed+trailer+photos


Found in the archives using the search.;)

heygrassman
07-13-2002, 10:57 PM
I have got to believe the key to this is getting as much up off the floor as possible. Racks for eaters, edgers, rakes, gas cans, yada.. would be essential. I am also thinking that geting that 21" in a rack/shelf (mid thigh level of course) like I see on a lot of these 6'10"s may be a way to go. You could put the nose of one of those 48"ers under the rack/shelf.

I got a 6.5hp self propelled that there is not a prayer in the world that I would put on a rack except I use it once is a blue moon.