PDA

View Full Version : Trimmer trap blade blocker for sale


Trevor8
05-25-2010, 06:42 PM
I'am selling this because I got the one for my exmark. This is used for a wb. It is a little difficult to mount but once you get it you will like it. It comes with a longer peice of board that you can cut incase the peice I cut doesn't fit. You will have to drill 2 holes on the deck and then mount the hinge using 2 bolts. You clamp the handle down using 2 peices of mettle and 2 bolts. I will get pics of it not mounted this week. Here is a link to the site http://www.trimmertrap.com/site/accessories/bb-1-wb-blade-blocker.html

It cost $200 new I will sell for $75 +s&h

NkyLawncare
05-25-2010, 06:49 PM
sent you a pm

Trevor8
05-25-2010, 07:04 PM
here are some pics

Trevor8
05-25-2010, 07:05 PM
It is a little dirty. Will clean before sale.

NkyLawncare
05-25-2010, 10:22 PM
Can you get me a total with shipping to 41015? The pivot looks rusty. Is it rusty or just dirty? Does it pivot well?

Trevor8
05-25-2010, 10:40 PM
No it's not rusty. It is just a brown color. Yes i will get you a total. Give me a few days I am busy with school as finals are coming up should have it by saturday if it rains tomorrow i will have it by then. I will PM you when I get it.

NkyLawncare
05-25-2010, 10:49 PM
Thanks Trevor. Can you also get me the measurements of the plate?

Trevor8
05-25-2010, 10:57 PM
It pivots well you just have to mess with the mounting to get it just right. I will try to get a video of it so i can show you it works good. If it is not mounted good then you will have to use more muscle to turn it. After a little adjusting it will work great. The only pain is installing it.

Kingfish
07-17-2011, 08:18 PM
It pivots well you just have to mess with the mounting to get it just right. I will try to get a video of it so i can show you it works good. If it is not mounted good then you will have to use more muscle to turn it. After a little adjusting it will work great. The only pain is installing it.




Did you ever get the video?

STLmower08
07-17-2011, 08:44 PM
If you still have this, I would like to buy it, assuming it would work on a 48" Turf Tracer.