PDA

View Full Version : need help with 32" hustler


DMVMower
05-26-2010, 11:45 PM
I have a 32" trimstar. It is having a problem. It is leaving a trail of cut grass in the middle between the blades. It is also leaving a little bit of un cut grass. I have ajusted the belt tension and put on sharp blades. It is doing this even cutting the lawn a second time. please help

mowerconsultant
05-28-2010, 04:01 PM
Check your engine RPM's, deck pitch and level, make sure deck is scraped clean.
Are the blades new? not worn out on the ends?
Double check your tire pressure also.

Pj