View Full Version : What blades for my ExMark?
05-28-2010, 08:00 PM
I live in North Central Indiana and have just purchased a used Ex Mark with a 60 inch Triton Deck and the 35HP motor. I removed the baffle that restricts the side discharge chute to help flow. What blades are going to give the best cut? If you have any other tips I am all ears.
05-28-2010, 11:16 PM
I recently went through some issues with my 60" Triton and was very pleased with the results that the teritory rep/dealer were able to come up with.
If you have a baffle on the trim side of the deck, take it out.
Blades I am using are called a notched medium lift I think... don't have the part # in front of me.
Deck pitch and the front skirt adjustment is very important... not sure of the ideal adjustment, but it is possible to get them to cut very well. My suggestion would be to take it to a good dealer and explain your issues with it.
05-28-2010, 11:24 PM
Thanks for the reply, if you happen across the blade P/N that would be most appreciated.
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.