Lawn Striper

[tmarc]

I have a 36" lawn striper for sale. It is mounted on my 50" Cub Cadet RZT.

I am asking $250.00. I can build these to fit any model.

Thanks,

Todd

[flatlander42]

when you hit a bump does that bracket smash into the muffler shield?

[tmarc]

Hi,

The pictures are about a week old and since then I have added about 3 inches to try to clear the muffler shield. My yard is mostly flat and I have not had any issues with it hitting. I'm still trying to tweek it a little to clear that shield without making it any longer.

Thanks,

Todd

[Glenn Lawn Care]

that is cool. does it strip good. i have have a roller on the deck so its not on the ground all the time.

[Jpeg lawn maintenance]

I am interested would like to see some action shots if you have some ? see how it stripes.

[tmarc]

When it stops raining here I will take some before and after shots. The last time I cut, I cut 1 inch shorter than I normaly cut and the stripes were not as defined as I wanted. It is supposed to be mounted at no more than a 45 degree angle and it was above that angle. I have since corrected that and will try different cutting heights to see where I need to be. Let me know if anyone has any advice.

Thanks

[RDA]

When it stops raining here I will take some before and after shots. The last time I cut, I cut 1 inch shorter than I normaly cut and the stripes were not as defined as I wanted. It is supposed to be mounted at no more than a 45 degree angle and it was above that angle. I have since corrected that and will try different cutting heights to see where I need to be.

What difference does the angle make, the rollers are round and roll on the ground regardless of the angle of the brackets.

Regards,

Rich

[tmarc]

When It was mounted higher than a 45, even with stops on the upper bar, When I back up, it would try to ride under the mower. Now with it mounted lower than a 45 it corrected that problem.

Thanks,

Todd

[tmarc]

Here is the front and side today after mowing.

[ygim]

looks sweet.

[flatlander42]

nice lawn.....

[xjjeepman1]

You still selling these?

[nortonlawncare]

does it drag when you turn?

[FERT-TEK]

http://www.lawnsite.com/showthread.php?t=199670