View Full Version : walker ghs grass box
07-18-2002, 03:16 PM
on the right side ( sitting in the seat ) of the ghs box down at the bottom it has a crack in the plastic is there a way to fix this?
07-19-2002, 11:54 AM
if you can't duck it, F**k it!
use some duck tape.
07-20-2002, 02:08 AM
apparently jason doesn't have a rolls royce mower sitting on the trailer!!!!!!
07-21-2002, 09:47 AM
gwoods, Try finding someone who does plastic welding.Should
be a few of those guys around.
If you want more responses,try posting this in the commercial
lawn care forum. This is the tractor forum. I own a Walker GHS
and they're certainly not tractors. :D
07-28-2002, 11:47 PM
auto body shop....real cheap
05-07-2005, 11:15 PM
I have just had to get a catcher box repaired. I used a company that repairs plastic bumpers. A whole lot cheaper than a new catcher
05-07-2005, 11:27 PM
cheaper way a strap plate and pop rivit.
05-07-2005, 11:59 PM
I have heard but have not got to try it yet that fiber glass patch kit from the auto parts store works good
05-08-2005, 05:14 AM
My box developed a crack where the grass chute enters the box. So a strap & pop rivets was not possible due to the location. Now my box looks like new.
Either way I had to stip down the box to get to the crack so I didn't want a repair that I may have to re-repair later. Total cost for the repair + mods to the frame to prevent it happening again $125.00. So all up not a bad deal.
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.