PDA

View Full Version : Looking For Spreader Screens


gkell88
07-18-2002, 08:18 PM
My local Lesco dealer no longer carries the square basket type screens we've used for several years.

Are any of you familiar with a company who might make these that would fit Lesco spreaders?

Thanks,

Gary

MATTHEW
07-18-2002, 08:55 PM
Why don't you just make one?
Get some mesh screen at the hardware store, bend it and tie strap it together. Shouldn't take too long, and should be cheap, too.

gkell88
07-18-2002, 11:02 PM
Originally posted by MATTHEW
Why don't you just make one?
Get some mesh screen at the hardware store, bend it and tie strap it together. Shouldn't take too long, and should be cheap, too.

That's exactly what I did for the first 15 years I was in the business. But I liked the Lesco versions better, and would like to have access to them again.

grassguy_
07-19-2002, 12:16 AM
The company that made the basket types was turf tech, out of Cleveland, Ohio. Not sure what their number is, might check with directiory assistance. Good Luck!

MATTHEW
07-22-2002, 12:37 AM
Correct me if I'm wrong, but are you referring to the basket types, or the expanded metal?

When I bought mine, I got a peice of expanded metal.

You can get one of those from a sheet metal shop for maybe $10.