View Full Version : pump belt length?

06-18-2010, 08:19 PM
The mower is a Husqvarna iz4819, & I am wandering if anyone can tell me the lenght & width of the pump belt. The Husq PN is 539106887 & Oregon PN is 510201401. I have spent 1 1/2 hrs on Oregon site looking w/ no luck. My dealer has it backordered so I bought a belt @ auto parts store, but not sure if it will work b/c it's 1/2" longer than the belt that broke. Dealer is closed or I wolud call them. Thank You in advance for any help.

06-18-2010, 09:29 PM
Also just wandering if a 1/2" differnce in lenght would matter much. Just not sure on the original length of belt since it broke. Thanks

06-18-2010, 09:36 PM
So long the belt you bought is ag...
Wait a minute...

You need the *&%^ belt dimensions on a belt you just bought that is 1/2" too long?
Say, did you graduate high school?

I'll give you a break this time because I've done a few things that all too
easily compare to this blunder, so, have you tried subtracting 1/2"?

06-18-2010, 09:55 PM
The belt I bought is 63" & what is left of the old belt is 62 1/2", I don't know what the length of the broken belt was when new, how much it may strech after 3 yrs. Just wanted to know if anyone might know the length of original belt or if this 1 would be fine.

07-08-2010, 11:20 AM
This might be a little late but it might help someone else out down the road.

The hydro drive belt Husqvarna P/N 539106887 is an A section belt with a nominal effective length of 64.75"