View Full Version : spraying problem
StratfordSealing
06-20-2010, 08:30 PM
Im having issues with my one machine, when I let go of the gun trigger it keeps spraying for a couple seconds and then trickles for another 3-4 seconds. I tried adjusting my pressure valve, changing the tip, but still doing it, the pump seems to be working fine and the trigger aint sticking so Im kinda stumped. Any clue what could be causing this?
SURE SEAL 1-888-PAVEMENT
06-21-2010, 10:06 AM
im having issues with my one machine, when i let go of the gun trigger it keeps spraying for a couple seconds and then trickles for another 3-4 seconds. I tried adjusting my pressure valve, changing the tip, but still doing it, the pump seems to be working fine and the trigger aint sticking so im kinda stumped. Any clue what could be causing this?
i assume you are in stratford ontario, using a asphalt cutback sealer. Your type of system would usually us a type of pressure washer gun. You say the gun is not sticking, but really it actually is. Check for a little valve on the gun, where the trigger pushes. That sometimes will stick a little and cause the sealer to continue on spraying on for a short while. Lube it with wd-40 really good and get it so it moves free. If it is not that, then you may need a new gun, but that is unlikely.
Lance bradshaw
sure seal pavement inc.
www.1888pavement.ca
lb@suresealpavement.com
StratfordSealing
06-21-2010, 12:45 PM
Yeah Im from stratford, ont and I use a pressure washer type gun, I just put some wd-40 on it and worked with it a bit, its a bit better but its still gushing after I release the handle a bit. Im gonna let it sit till after supper and lube it some more and work with it a bit and see if its working better then, if not Ill go grab a replacement. Thanks for the tip, I was a bit baffled on that one and its a big relief knowning its just the gun.
shepoutside
06-21-2010, 06:22 PM
Run some solval (tar and ashpalt remover) through the gun and it will clean it up.
JFGauvreau
06-21-2010, 08:39 PM
Run some solval (tar and ashpalt remover) through the gun and it will clean it up.
Where do you get that stuff ?
SURE SEAL 1-888-PAVEMENT
06-21-2010, 09:05 PM
You can get it at marathon road maintenance equipment in burlington, on.
Call pete in parts dept. @ 905-335-0000, reg. Business hours
SURE SEAL 1-888-PAVEMENT
06-21-2010, 09:07 PM
They can ship you a case or individual bottles, or it comes in 5 gal. Pail or 205l drum.
BIGBOY2008
06-22-2010, 02:03 AM
I went ahead and bought a five gallon bucket of the Solval. The stuff is expensive but the peace of mind by having it on the truck is worth a lot more than the cost of the Solval. And five gallons is a heck of a lot cheaper compared to buying one gallon.
shepoutside
06-22-2010, 06:25 AM
It's great stuff, all our trucks carry it!
BIGBOY2008
06-22-2010, 04:41 PM
I now carry the five gallon bucket of Solval and two of the quart size spray bottles and another five gallon bucket packed tight with pieces of cotton t-shirt material.
JFGauvreau
06-22-2010, 07:45 PM
Is that stuff orange? I know I was using some orange color solvent before, not sure if that's the same, like is it strong like varsol?
Like ex: if you over spray on a white garage door (not very good I know) if you take it off with varsol it will dissolve the tar so the garage door will never be as clean as it was before. How would that stuff do?
shepoutside
06-22-2010, 11:20 PM
This stuff is clear, and if I did, and not saying last year I hit a white garage door,:rolleyes: but if I did, it cleaned up perfect, without much effort.:clapping: Just say'n.
JFGauvreau
06-23-2010, 08:44 AM
Cool sounds good, i'll have to try it
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.