PDA

View Full Version : Found an e-clip off my mower


GonHuntin
07-20-2010, 02:43 PM
I always blow the clippings and dust off my mower when I finish mowing......yesterday, I found an e-clip about 1" in diameter laying on the driveway after I blew the mower off and I can't see where it goes???

I took the clip by my dealer and asked the service guys if they knew where it went, they thought it came off the deck lift bars, so I checked, the 4 e-clips on the deck lift bars are in place and the clip I found is a bit smaller than those.

This mower only has 8 hours on it and I sure don't want something to come unglued and damage the mower!!!

Any other ideas???

mowerconsultant
07-21-2010, 05:10 PM
If I am not mistaken you have a 54" Hustler Z Diesel?
If so the e-clip on the deck lift assemblies amounts to 7 of them, take a look at your parts manual and you will see this, you can double check the location of all of them.
Here is a link to your parts manual > http://www.hustlerturf.com/images/product_manuals/109706_0510.pdf
Look on page 4-2
The clip size is 1.00 X .625 X .050 and those are the only 7 places we use it on that mower.
I am not aware of anywhere else on your mower we use a e-clip.

Pj