PDA

View Full Version : bad boy deck spindle


extreme lawn care
08-08-2010, 04:45 PM
does anyone know if deck spindles off of another mower will fit a 60" bad boy deck or if i can by aftermarket?

MS_SURVEYOR
08-08-2010, 04:51 PM
Why not replace the bearings? Bad Boy spindles are made to easily replace the bearings.

Here's the Bad Boy service and parts manual site. Order the bearing from Bad Boy and they'll be there the next day.

http://www.badboymowers.com/view/manuals

extreme lawn care
08-08-2010, 04:57 PM
the metal that the blade bolt threads in to keeps striping out

MS_SURVEYOR
08-08-2010, 05:24 PM
What mower do you have?

MS_SURVEYOR
08-08-2010, 05:39 PM
But anyway, That is the spindle shaft. It's replaceable too.

Bad Boy Contact

TAYLOR PRINCE
Service Technician
taylor.prince@badboymowers.com
(870) 698-0090

extreme lawn care
08-08-2010, 05:41 PM
2008 lightning 60" 31 kaw

MS_SURVEYOR
08-08-2010, 06:11 PM
Call Bad Boy! They'll tighten you up!

extreme lawn care
08-08-2010, 06:30 PM
just really gets me behind having to wait for it to come in hoping another manufacturer had one locally

MS_SURVEYOR
08-08-2010, 06:49 PM
No dude! It's like fed-ex to your door the next morning! I've call them at 3 pm to wake up at 8 am the next morning with the part on my porch. But TAYLOR PRINCE or another tech will be able to tell what other spindle will work!

djagusch
08-08-2010, 06:53 PM
Good local dealer support is key on having a successful mowing operation. Without it or backups for every mower downtime will eat into profits quickly.
Posted via Mobile Device

extreme lawn care
08-08-2010, 07:39 PM
hapenned on a sunday cant order untill monday then i live in small town so i dont get till tuesday afternoon and the dealer i bought it from is 2 hours away

BigFish
08-08-2010, 09:28 PM
Any decent local machine shop should be able to heli-coil it for ya. Should be a 'while you wait deal'. It shouldn't be that big a deal. Or they might could retap it enough to get you going. Could mayhaps tap it the next size or metric and just drill out the one blade.