View Full Version : Compatible spindles for Wright

08-11-2010, 11:04 PM
2006 wright z model wz52 25 kawe serial 33013

What would be a compatible spindle? I have a feeling they're going to want north of 150 per spindle for this machine. The problem I'm having is the shaft seems to be bent as the blades are all crazy some an inch higher than the other. Then when I spin them a little after loosing the bolts they seem to be better or worse. I put my dial indicator on the actual shaft to check run-out and it seems to be off which would only multiple on the actual end of the blade tip. Could I run say Scag spindles or something else. I found some cast iron Scag spindles for 60 bucks on Express mower parts but I can't seem to find Wright Spindles any where for a decent price. I plan on calling the dealer in the morning to confirm the price and if it's not to bad I'd get factory ones even though the sealed bearing give some issues but I never had a problem with the others I had and I'm not one to keep up on greasing.