View Full Version : How much material would i need for this???
08-18-2010, 11:19 AM
Ok i am going to put in a 19x20 square of pavers at my house
I was just wondering how much material i would need.....
I know i will need sand, slag and one other one that i cant remember but i know i will need 2 inches of each compacted
can anyone guess how many yards and or tons i would need???
what is the conversion from yards to tons??
08-18-2010, 11:27 AM
Don't forget your polymeric sand!
Posted via Mobile Device
I may have misunderstood, but first of all you only need 1 inch of bedding sand, not 2 inches. Also, don't compact your bedding sand
08-18-2010, 01:38 PM
Search aggregate calculator on google.
08-22-2010, 09:51 PM
10 Ton of 2A Mod
2.25 Ton of concrete sand
Edging...depends on the layout
400 square feet of geo fabric
08-25-2010, 11:35 AM
We never use less than a 5 inch base of 21A (crusher run or astm 2940? ) and we never use slag (screenings) for concrete paver patios. We use concrete sand for bedding. The ICPI has some construction details that are helpful www.icpi.org. For cubic yard of crushed stone to ton conversions I figure 1 yard = 1.5 tons. It will vary depending upon size of stone and moisture content. Also figure at least a 10% waste factor on the volume of your crushed stone.
08-25-2010, 06:07 PM
vBulletin® v3.8.6, Copyright ©2000-2015, Jelsoft Enterprises Ltd.