View Full Version : wright stander spacers
08-19-2010, 06:33 PM
How many 1/4" spacers are on the new wright Standers, they say in the owners manual that it can go from 2 1/2" to 4" on the middle hole settings
08-20-2010, 11:45 AM
Currently the Standers (large frames 48, 52 & 61”) have 3 spacers below and 1 on top. Small frame (36 and 42”) have 4 spacers below, 1 on top and the 32” has 5 below and 1 on top. Moving the blade spacers will give a quick change of cut height but does affect the quality of cut. Changing blade spacers is only recommended for short term projects. We recommend for any long term cutting at other then 3”, to keep the blade spacers in the factory settings and move the wheel motor supports and caster arms up or down.
08-24-2010, 10:15 PM
Could I replace the 1/16 spacers with another 1/4 spacer on the front caster wheel on the new standers?
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.