PDA

View Full Version : Wright stander front caster spacers


dogwood1984
08-26-2010, 05:36 PM
Could I replace the 1/16 spacers with another 1/4 spacer on the front caster wheel on the new standers?

WrightCommercial
08-27-2010, 04:26 PM
dogwood1984,

The 1/16" spacers on the front caster are there to give a finer adjustment on the cutter deck pitch and total 1/2", so if you wanted to replace half of them with a 1/4" spacer or all of them with another "c" spacer you can.

Best Regards
Wright Mfg. Service Dept.