PDA

View Full Version : Honda Motor - Wiring for kill/on-off switch


DreamtheGreen
09-12-2010, 04:17 PM
New Honda motor 13hp, I have tried wiring a kill/toggle switch for it but have not succeded. Does anyone know how to wire this motor for a kill switch or toggle switch for it.

Please Help!

Restrorob
09-12-2010, 05:23 PM
You should use a two wire toggle, One wire to the coil kill lead most likely hooked to a kill switch on the throttle control panel. The other wire to a good paint free ground point.