PDA

View Full Version : Trailer Sides


Trevor8
09-23-2010, 07:45 PM
How should I create trailer sides on my 5x8 trailer because it has a thin tube with wires running through it on the inside of my trailer, which would get in the way of the sides?

mowerbrad
09-23-2010, 08:36 PM
Some plywood sides and U-bolts to go around your tube railing?

newjerseylandscaping
11-02-2010, 10:40 PM
dont know if you did it yet but i just cut the bottom of the board at a 45degree angle and it cleared the wire tube. i screwed my to the rails and then the boards at the 2 sides and the front meet, ill try to get some pics up soon, if you do it maby you can snap some pics ?
thanks
hunter

seabee1
11-03-2010, 12:16 AM
hey trevor do you have a picture of what you are talking about i am having a hard time picturing this ? :confused:

newjerseylandscaping
11-03-2010, 02:05 AM
If it is what i think it is its a little pipe that runs along the inside of the trailer floor on the side that is used to run the wires for the lights from the front to the back.