PDA

View Full Version : Exmark stupid question....


Mjben08
10-03-2010, 12:57 AM
Can i use a 15/16 hole blade on my exmark that regularly uses 5/8 hole blade....please be gentle with me

BigGreen1
10-03-2010, 01:07 AM
Mj,

If you really wanted to use it you would need to have an adapter machined that would slip into the larger blade with a hole that was drilled to 5/8. It can be done.

Tim

StihlMechanic
10-03-2010, 01:13 AM
Are the right blades for your machine impossible to buy?

Mjben08
10-03-2010, 01:16 AM
I can get the mulch blades for my 52'' for about 3 bucks apiece online with the 15/16 hole!

unkownfl
10-03-2010, 01:56 AM
You can get bushings from LOWES or ACE to make up the 5/16

Mjben08
10-03-2010, 02:10 AM
You can get bushings from LOWES or ACE to make up the 5/16

all the bushing are made for 1'' hole. Do i just bore the 15/16'' hole to a 1''?

unkownfl
10-03-2010, 02:25 AM
No you turn the 1 inch bushing down to 15/16