View Full Version : Doubles On 260Z
08-19-2002, 06:27 PM
Do you have A double Blade Kit for your 260 Z Mid mount yet.
Are the blades Cutting at the same height On Your Double Blade kits On Your other mowers. And are the Blades On the same Cutting height As the blades If You Are Runnig just one Per spindal.
Thank you Johnny G.
08-20-2002, 01:47 PM
Well, the answer to your question is not on our current models. If we were to install the double blade kits on the 50" ~ 72" decks, the blades would set below the leading edge of the deck and not allow us to pass the ANSI specification that we choose to adhear to because of legal reasons.
We may in the near future choose to release the double blade kits for our new product. (Stay tooned)
As for blade cutting edges they will not run on the same plain thus giving you two different cutting plains which really aids to chop up the grass.
08-20-2002, 01:59 PM
The Blades On the same Hight Don't seam To have blow out As Much. But They Do work For choping Up The Grass.
Will this New Product Be before Spring 2003?
Thank You John Gamba Lawnone
08-22-2002, 11:53 AM
John, We will be introducing the new product to our dealers second week of Sept. Soon after you will see new product literature and info on our web site.
08-22-2002, 04:56 PM
My first mower Was a gravely And I Still Have It.
08-23-2002, 09:25 AM
Thanks for being so loyal to the product. We've made some great improvement for the new product for 2003. Stay tooned!
vBulletin® v3.8.6, Copyright ©2000-2016, Jelsoft Enterprises Ltd.