View Full Version : For sale: Burkeen b30 **new engine**

01-19-2011, 11:15 PM

-NEW ENGINE with less than 500 hours
-Engine Type: Hatz Datz Diesel Z790
-GREAT for parts
-Optional Trailer for Purchase


Burkeen B30: $1,700
Hatz Engine (separate) $750
Trailer (separate) $500


edit - you can't post an email address at the site...please list a phone number as a way of contact until you have been a member of the site for 10 days and have made 10 posts...then you will be able to send/receive private messages. thanks, Mike

01-24-2011, 04:45 PM
Interested in the rear end under the fuel compartment

01-24-2011, 08:57 PM
you would like a picture of this area?

01-25-2011, 02:15 PM
Yeah, if possible. Main thing is if you are interested in scrapping the machine for pieces & shipping.

02-03-2011, 05:10 PM
Here are a ton of pictures of the area you requested. I called about a shipping quote and they said they will calculate the number but it should be under $2000. However you need a ramp to load it off the truck (approx 3-4ft) that can support the 2,800 lb machine.

4 seasons lawn&land
02-03-2011, 05:21 PM
what the hell is it?

02-03-2011, 05:24 PM
he asked for pictures under the machine

4 seasons lawn&land
02-03-2011, 05:50 PM
I dont know what the entire machine is. Like a pre war trencher or something?

02-03-2011, 05:53 PM
what the hell is it?

Good for you!! I was wondering the same thing but was too embarassed to ask!!! :laugh::laugh::laugh::laugh:

02-03-2011, 06:00 PM
trencher and vibratory plow. Good to trench into ground, pull wire, or pull pipe underground

02-03-2011, 06:21 PM
Lets start with the shipping.... That weight should run about $200.00, if the rear end were strapped to a pallet and shipped freightline, (truck) to Nashville, Tn.

So I guess it would be under $2000.00.......

Next, what do you want for the rear-end? It would involve jacking it up, blocking the rear of the machine, removing the rear tires, unbolting the fuel compartment & removing, unbolting the rear end from the frame, removing the drive yoke bolts, securing the rear end on a pallet and dropping it to a shipper.

04-10-2012, 09:57 PM
I need the Gear Box if you still have it! Should be a Terrell Model # HL4-CP-100???


11-21-2013, 01:21 PM
I am interested in the Burkeen B-30 . Do you still have it? call me at 918.720.4294 . What condition is it in, is functional now?