PDA

View Full Version : Wheel/Axle kit for Lesco 100 Gallon Sprayer


michaelthomas1
01-22-2011, 11:42 AM
I am looking to put my lesco 100 Gallon sprayer on wheels rather than
put it the back of my pick-up truck bed so I can pull it from job to job . Does anyone know where to find an axle kit that will hold about 3500 #s

Michael *trucewhiteflag*

phasthound
01-22-2011, 12:17 PM
I am looking to put my lesco 100 Gallon sprayer on wheels rather than
put it the back of my pick-up truck bed so I can pull it from job to job . Does anyone know where to find an axle kit that will hold about 3500 #s

Michael *trucewhiteflag*

I would highly recommend using a small trailer instead.

Smallaxe
01-22-2011, 06:08 PM
One of the local dudes that do squirt and fert in my neighborhood, has a 4WD cart that pulls a tank on wheels with boom wands that can expand to different widths... I think this is the next best thing to a 300 ft. hose, that TGCL has, as far as efficiency is concerned...

JDUtah
01-22-2011, 09:48 PM
Yes, just bolt it to a utility trailer. It's 100 gallon, so you might be able to get away with a single axle.

Turboguy
01-23-2011, 08:46 AM
Your loaded weight is only going to be 1200 pounds or so +/-. You could even get away with one of the cheap 4 x 8 trailers Home Depot sells for next to nothing and then you have a title, lights and plates.

Yes, even a single axle is fine. Even your regular single axle trailers are often 3500 # GVW. but the cheapies are a bit less.