PDA

View Full Version : grease fitting


turftracerhp
02-27-2011, 08:18 PM
does anyone what size the fitting is that would go on the front of my exmark lazer on the casters.

kilgoja
02-27-2011, 09:04 PM
the standard size that's on all lawnmowers

CLARK LAWN
02-27-2011, 09:05 PM
well there are only 2 sizes made. 1/8 npf or 1/4 npf. is it a big one or a little one?
Posted via Mobile Device

turftracerhp
02-27-2011, 09:13 PM
im not sure cause theres nothing but a screw in plug right now.i assume that comes out and you can put a fitting in its place or maybe not.

Guzzo856
02-27-2011, 09:29 PM
you can screw in the fitting. Im almost positive it would be a 1/4. Call exmark, they should know for sure

BINKY1902
02-27-2011, 10:05 PM
Take out the plug and carry it to the hardware store or dealer with you.

CLARK LAWN
02-27-2011, 11:18 PM
just go buy an assorrtment of them, its good to have them handy as they break and/or get plugged up all the time.

Robert Pruitt
02-27-2011, 11:26 PM
well there are only 2 sizes made. 1/8 npf or 1/4 npf. is it a big one or a little one?
Posted via Mobile Device

There is also the press in type.

White Gardens
03-02-2011, 11:18 AM
just go buy an assorrtment of them, its good to have them handy as they break and/or get plugged up all the time.

Agreed! I got a kit in my shop with just about every grease zirk imaginable.

The 44* and 90* fittings come in real handy for tight spots.

Stillwater
03-02-2011, 11:23 AM
well there are only 2 sizes made. 1/8 npf or 1/4 npf. is it a big one or a little one?
Posted via Mobile Device

They available in more sizes than 2, ever look at a comprehensive zerk catalog?? it could make your eyes bleed