PDA

View Full Version : hydroseeding vetch


turfquip
09-19-2002, 07:11 PM
I've been contacted to do a hydroseeeding application of vetch on a hillside. I'm a little nervous due to the cost of the seed and since the plan is for no hydromulch to be used, just seed and innoculant, I know i'll have to cover a lot of ground FAST.

Any helpful suggestions out there?

paul
09-19-2002, 07:32 PM
Ed, here are a few hints.
#1 Use some mulch the green helps you see where you have sprayed.
#2 Mark off the area you need to seed in a grid, divide your seed into two amounts, that way you shoot the area twice and the grid helps you see how much your applying.
#3 With crown Vetch use 3 time the innoccluant that you normally would use.

One more thing about the mulch it helps hold the seed in suspension, giving you better dispersion.

turfquip
09-19-2002, 10:06 PM
Thank you Paul!

Sean Gassman
10-04-2002, 01:31 AM
You may also want to use a polycrelomid (sp?) tactifier. It will hold everything in place since you will be using very little mulch