PDA

View Full Version : help with pattern selection


kgserv
04-06-2011, 10:18 PM
i have a job to put a paver apron around a lagoon style pool. the pool has alot of curves i was wondering what may be the easiest pattern for this job the pavers are 6x9 and 6x6 in size. the apron will be 3' at the thinnest part and out to 12' for different parts around the pool.in total about 700 sq.ft would it be easier to just use a random pattern to make it easier to make all the cuts?

kgserv
04-06-2011, 10:20 PM
there is a 3 foot concrete apron around the pool before the pavers start.

zedosix
04-07-2011, 07:37 AM
I would go with a random pattern around the pool, just make sure you pull string lines or chalk lines to line up both sides equally. I would of suggested a runner bond around the pool, but since there is concrete you don't have a choice.

DVS Hardscaper
04-07-2011, 08:04 AM
Random
Pattern.

Because somewhere the Pavers will not meet together an you'll have to cut them to fit. With a random pattern this will nit be noticeable.
Posted via Mobile Device

kgserv
04-07-2011, 08:45 AM
thanks guys